11
ENEN
widescreen broadcasts and for encrypted channels. If a TV broadcast is avail-
able in multiple languages or with multiple sound channels, or if multiple
radio channels are available on a single radio station slot, this will be displayed
on screen. You may then proceed as follows to select a different language or a
different audio channel:
> Press the Option key. A list will now be displayed on screen, indicating
the languages currently available.
> Use the arrow keys up/down to highlight the desired language or the
desired radio station and confi rm by pressing OK. You may now listen
to the channel in the language selected. Your digital receiver is also
equipped to receive monaural channels.
> Use the arrow keys left/right to choose between Mono channel 1 ( ),
Mono channel 2 ( ) and Stereo ( ).
Volume control
> Adjust the volume of your digital receiver using the Volume + key to
increase the volume, and Volume – to decrease the volume.
> Press the mute key to switch the sound on or off.
TV/Radio switching
> By pressing the TV/Radio button, you can switch between TV and Radio
operation.
Access Electronic Channel Guide (EPG):
> Press the SFI/EPG key on the remote control of the digital receiver.
The Electronic Channel Guide then appears on the screen. The chan-
nels you have selected, or those of the factory default settings, will be
shown with their current channels. You can now also use the EPG func-
tion to obtain information on various channels. In addition, you may use
the EPG functions to select a particular channel, to pre-select a channel,
or to set a timer for a channel.
Exit EPG
> Press either the Menu or the TV/Radio key to return to normal operation.
Hard disk operation
Recording
Warning!!!
Simultaneous receiving of two encrypted channels
Your receiver also allows you to receive two different encrypted channels
simultaneously, using only one CI module and only a single valid Smartcard.
To Next Page
Loading...
Need help?
General
