Why does my TechniSat Tuner have no connection to the network?
If your TechniSat Tuner has no connection to the network, it could be due to incorrect network settings. Check the network settings. The network cable may also not be connected correctly, so check the network connection. It's also possible that the network connection is not allowed; allow network connection in Special functions > Allow network.
Why do I have sound but no TV picture on my TechniSat DIGIPLUS UHD S?
If you are only getting sound and no TV picture on your TechniSat Tuner, it could be that radio mode is selected and the radio background image is switched off. Check the setting.
How to increase the text size on my TechniSat Tuner?
If texts in the info box or EPG plus detailed info are difficult to read at a distance on your TechniSat Tuner, the character size might be set to "small". Adjust the character size.
General| Certification | CE |
|---|---|
| Package depth | 195 mm |
| Package width | 310 mm |
| Package height | 80 mm |
| Package weight | 1350 g |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 75 % |
| Timer | Yes |
| Tuner type | Digital |
| Demodulation | 8PSK, QPSK |
| Product color | Black |
| Interactive TV | - |
| Frequency range | 950 - 2150 MHz |
| Number of tuners | 2 tuner(s) |
| Audio output channels | - channels |
| On Screen Display (OSD) languages | CZE, DEU, DUT, ENG, ESP, FRE, GRE, HUN, ITA, POL, POR, RUS, SWE, TUR |
| Digital Satellite Equipment Control (DiSEqC) | 1.0, 1.2 |
| Signal source | Satellite |
| Supported video modes | 576i, 576p, 720p, 1080i, 1080p, 2160p |
| Digital signal format system | DVB-S, DVB-S2 |
| Audio formats supported | AAC, AIFF, FLAC, M4A, MP2, MP3, WAV |
| Image formats supported | BMP, GIF, JPEG, PNG |
| Video formats supported | ASF, AVI, M2TS, MKV, MOV, MP4, MPG, MTS, TS, TS4, VOB |
| Video compression formats | AVC, H.264, H.265, HEVC, MPEG1, MPEG2 |
| Display type | LCD |
| Ethernet LAN data rates | 1000 Mbit/s |
| AC input voltage | 230 V |
| Power consumption | 400 mA |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 17.1 W |
| USB 2.0 ports quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Built-in HDD | No |
Weight and Dimensions| Depth | 175 mm |
|---|---|
| Width | 220 mm |
| Height | 40 mm |
| Weight | 668 g |
Explains warning and information symbols used in the manual.
How to connect the device to a television via HDMI.
Methods for choosing TV or radio channels.
Records programmes using the DVR function.
Accesses and plays recorded content.
To Next Page
