56
Standby clock is switched
off
Switch standby clock on
(see Point 8.2.4)
Text in e.g. Infobox or
SFIplus detailed information
is hard to read
at a distance
Character size set to "small" Check picture format (see
Point 8.8.1.1)
Antenna incorrectly adjusted Adjust antenna
Antenna cannot be
rotated
Motor not compatible with
DiSEqC 1.2
Use a suitable motor
Time not displayed while in
standby mode
Time not acquired Play e.g. ZDF for 30
seconds
Incorrect external unit
installed at receiver
Correct the setting
(see Point 8.6)
Defective LNB Replace LNB
Faulty or missing cable
connection
Check all cable connections
(see Point 5)
Obstacle between dish and
satellite, (e.g. a tree)
Mount dish with "clear line
of sight"
No picture, no sound
display on
Short circuit in the LNB
connection
Switch off receiver, resolve
short circuit, switch receiver
back on
Dish too small for your
location
Use larger
antenna
Antenna incorrectly adjusted Adjust antenna
Channel no longer being
broadcast
None
Intermittent appearance of
square blocks
in the picture. Switches to
freeze frame intermittently,
no sound. Screen black at
certain times with the
message "no signal".
Heavy rain or snow Remove snow from dish
Channel transferred to a
different transponder
Run a search
(see Point 17)
Fault Possible cause
Remedy
Cannot receive channels
that were previously being
received
Antenna defective or not
correctly adjusted
Check antenna
To Next Page
Loading...
Need help?
General
