14
USB Operation
- When a USB device is connected to the unit, the display
shows “USB disk attached – Open folder?” (F.5), and then press
the ENTER button to confirm YES.
Alternatively,
- During Music Player mode, press the PRESET buttons
to selec t USB playback and press the ENTER button to
confirm.
1.
Press the PRESET buttons to selec t and press the
ENTER button to confirm a MP3/WMA file.
(F.5)
USB playback
USB disk attached
-
Open
folder?
YES NO
Button Function
Press to pause playback or resume normal playback
Press to skip to the previous track.
Press and hold to fast rewind the current track.
Press to skip to the next track.
Press and hold to fast forward the current track.
The unit can only play MP3 and WMA file formats in USB operation.
This unit supports USB version 1.1 and 2.0.
The unit can support USB devices with up to 32GB of memory.
The unit may not be compatible with all USB devices; this is not an indication of a problem
with the unit.
Repeat Playback
1. Press the REPEAT button once on the remote control, “ ” will show on the display. It will play
the current folder repeatedly.
2.
Press the REPEAT button once more again, the repeat function will turn off.
Charge Your Device
You can charge your device through the USB socket on this unit with a USB cable (not supplied).
• The maximum current for USB charging is 1A.
• All devices for USB charging are not guaranteed.
• The USB charging is only active during power ON mode, it is not supported when unit is at
STANDBY mode.
To Next Page
Loading...
Need help?
General