7
System Settings
Press the MENU button to display the menu, press the PRESET buttons to select Main menu
and then press the ENTER button to confirm. Press the PRESET buttons to select System
settings and then press the ENTER button to confirm.
Equaliser
This system supports a variety of equalizers and sound effects.
- Press the EQ button to access Equaliser menu
Alternatively,
- During System settings mode, press the PRESET buttons to select Equaliser and then
press the ENTER button to confirm.
1.
The display will show : FLAT > CLASSIC > ROCK > POP > JAZZ
2.
Press the PRESET buttons to select and then press the ENTER button to confirm.
Network
1.
During System Settings mode, press the PRESET buttons to select Network and press
the ENTER button to confirm.
2.
Press the PRESET buttons to select from the following settings, and then press the ENTER
button to confirm.
Network wizard
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Wired – select wired network.
Manual config – select wired/wireless network with DHCP enable/disable.
PBC Wlan setup
Select PBC on the unit and press the PBC button on the modem device that you
wish to connect with. Press the ENTER button to continue.
View settings
Display the setting on the unit.
Wlan region
Select a country of your choice.
Manual settings
Select wired/wireless network with DHCP enable/disable.
NetRemote
PIN Setup
To define a PIN number to be entered before being able to connect to the unit
remotely over a network
Network profile
View the connected network.
Clear network
settings
To delete the connected network memory in Network profile.
Keep network
connected
To define whether remains connected to its network in Standby mode and when no
in Network radio mode. This is necessary for remote operation and
streaming in Music Player mode.
3.
Press the BACK button on the unit or on the remote control to cancel the setting and return
back to the previous menu.
To Next Page
Loading...
Need help?
General