8
Time/Date
The Time/Date can be automatically set once it has been connected to the Internet, DAB+ or FM radio
station with time/date information. You may also adjust the Time/Date manually.
- Press the CLOCK button to access Set Time/Date.
Alternatively,
- During System settings mode, press the PRESET buttons to select Time/Date and press
the ENTER button to confirm. Press the PRESET buttons to select Set Time/Date and
press the ENTER button to confirm.
1.
The date digits will flash on the display.
2.
Press the PRESET buttons to adjust the day and then press the ENTER button to confirm.
3.
Repeat above Step (2) to set the Month/Year/Hour/Minute.
4.
The date and time settings are now complete.
For the other settings under Time/Date, press the PRESET buttons to select from the following
options and then press the ENTER button to confirm.
Auto update
Update from DAB / FM / Network.
Set format
12 / 24 hour format.
Set timezone
Select a time zone. (Only available when Auto update from Network is on.)
Daylight savings
Select daylight savings. (Only available when Auto update from Network is on.)
The default auto time update setting is “Update from Network”. If you would like to manually set
the time, it is recommended to turn the Auto update function off.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play mode.
1.
During System settings mode, press the PRESET buttons to select Inactive Standby and
then press the ENTER button to confirm.
2.
The display will show : Off > 2 hours > 4 hours > 5 hours > 6 hours
3.
Press the PRESET buttons to select and then press the ENTER button to confirm.
Language
1.
During System settings mode, press the PRESET buttons to select Language and then
press the ENTER button to confirm.
2.
Press the PRESET buttons to change the display language of your choice.
3.
Press the ENTER button to confirm.
Factory Reset
There may be times when you need to reset your unit back to the factory settings especially when you
have moved house. If you experience reception problems you may want to reset and try again. If you
move to another part of the country and pick up the local and national DAB+ stations in that area, your
previously tuned channels may no longer be available.
1.
During System settings mode, press the PRESET buttons to select “Factory reset”, and
press the ENTER button to confirm.
To Next Page
Loading...
Need help?
General