9
2.
Press the PRESET buttons to select Yes, and press the ENTER button to confirm or select
No to cancel.
After the system reset, all the tuned stations, DAB & FM preset stations will be erased.
Software update
1.
During System settings mode, press the PRESET buttons to select Software update and
then press the ENTER button to confirm.
2.
Press the PRESET buttons to select Auto-check setting or Check now, and then press
the ENTER button to confirm.
Before downloading software, ensure that the radio is plugged into a stable mains power
connection. Interrupting the mains supply during software download can lead to functional
disturbances and/or damage to the unit!
Setup wizard
The setup wizard is available in the system settings section; you can run through this to configure
settings for date/time and network. Once this has finished, your radio is ready to use.
It is not necessary to run through the setup wizard if a wired network is being used.
Info
1.
During System settings mode, press the PRESET buttons to select Info and then press
the ENTER button to confirm.
2.
The software version and Radio ID will show on the display.
Backlight
1.
During System settings mode, press the PRESET buttons to select Backlight and then
press the ENTER button to confirm.
2.
For the other settings under Backlight, press the PRESET buttons to select the following
options and then press the ENTER button to confirm.
Operation Mode
High/ Medium/ Low
Standby Mode
Time out: Off/ 10 sec/ 30 sec/ 60 sec
Standby Level: Medium/ Low/ Off
To Next Page
Loading...
Need help?
General