TechniSat HD-S 261 - Security and Maintenance

30
6.4 Picture seings
In the [System] > [Picture] menu, you can carry out the seings for
brightness, contrast, saturation, hue and sharpness.
6.5 Time seings
In the [System] > [Time] menu, you can make various dierent seings
for displaying the time.
6.5.1 Region
Select in this line in which country the device is to be operated.
6.5.2 GMT usage
Select here whether you want the device to adjust to GMT automatically
(by region), you want to do it manually (user-defined), or you want to set
the time and date manually (O).
Depending on the selection, the adjustment or the time/date seing
must be made in the subsequent lines of the OSD.
6.6 Timer
In the [System] > [Timer] menu, you can see an overview of the on/o
timers programmed via the EPG, change them or programme the timers
manually.
Select an existing timer to modify it or an empty timer location (O) to
programme a new timer. The rest of the procedure is identical.
Select the timer mode (Once, Daily or O) and the desired channel, using
the arrow keys.
Enter the date (in the format YYYY.MM.DD), the start time and the
duration in sequence using the numeric keys.
Then save your timer programming.
6.7 Child lock
In the [System] > [Parental block] menu, you can switch the menu block
and PIN query on/o, and change the PIN you need to enter.
The PIN (factory seing 0000) must always be entered to open this
menu.
6.7.1 Menu block
Here you can select whether the calling up of menus should be blocked
by the PIN request.
6.7.2 PIN
This menu item switches the PIN query for blocked channels on and o
according to item 6.1.2.
6.7.3 New PIN
First enter the new PIN here and then confirm it by entering it again.
6.8 OSD seings
Set the OSD fade-in duration and transparency in the [System] > [OSD
Seing] menu.
6.8.1 Hide OSD
Select the time in seconds aer which the OSD should disappear, e.g.
aer a channel change.
6.8.2 OSD transparency
Turn o the OSD transparency or set the level to 10 %, 20 %, 30 % or
40 %.