Techno CNC Systems NK105G2 - Loading a G-Code File

To Next Page

To Previous Page

Call: 1-631-648-7481 or Visit: support.technocnc.com

HD Series Manual

NK105G2

3.6- Loading a G-code

File.

Press the Menu button.

Select“2.USBles”toaccesstheashdrive.

OnlyaG-codelewithan“nc”extensionwithshow.

Scrollthroughtheleswith  and

SelectlebypressingOK.

Thenloadthelebypressing1.

Note:

Files can be copied from this USB to the controller using the “2” button

Local disk space is limited!

Oncealeiscopiedlocally,itcanalsobeselectedfromthejogspeed/stepsizescreen