BIKE XT: Service & Maintenance manual - rev. 2.0
Page 5.2
When the machine is turned on it will perform a power-on test which:
• sounds the buzzer;
• lights all the LEDs.
At the end of the power-on test the machine enters standby mode, awaiting a keyboard command.
To check the correct operation of the machine:
• get on the machine;
• start exercising;
• check that the RPM display changes accordingly;
• check that the intensity of the exercise varies when the “+” and “–” buttons are pressed, and that
the corresponding difficulty level LEDs change accordingly;
• put on the heart rate transmitter and check that the machine correctly measures the heart rate
value.
To Next Page
Loading...
