Technogym Run Forma - Electrical Connection

19
Run Forma and Spazio Forma
11 Electrical connection
The product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk
of electric shock. The product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
!
DANGER
The power supply socket must be grounded . If not, a ground connection must be installed by a qualied electrician before connecting the equipment
to the electricity mains.
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualied electrician or serviceman
if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product; if it will not t in the outlet,
have a proper outlet installed by a qualied electrician.
Before connecting the equipment to the mains power supply, ensure that the
electrical installation complies to binding regulations. Check the mains power
supply specications on the equipment identity label.
!
Warnings
The wall socket must be located in a place where the plugging and
unplugging can be done easily and safely.
When plugging in, the main switch on the equipment must be in the 0
position (i.e. the equipment must be switched o).
Check the state of the power supply cable periodically.
Plug the power cable rst into the equipment socket and then into the wall
socket.