Technogym Run Forma - Easily Solved Problems

27
Run Forma and Spazio Forma
16 Easily solved problems
The following table lists a series of problems that may arise during normal use of the equipment. If the solutions given don’t solve the problem, or if the problems
are dierent, ask for help from the Technical Support Service.
Problem Cause
Remedy
Equipment doesn’t switch on
Power supply cable not plugged in
Plug the power supply cable into the wall socket
Mains power failure
Check the power supply in the mains socket in question by plugging
in another appliance that denitely works
Power supply cable damaged
Contact the Technogym Technical Support Service
Power supply cable connector not plugged
into equipment
Plug the connector in
The main switch is o
Switch on the main switch
Burnt-out fuse
To replace the blown fuse with a spare contact the Technogym
Technical Support Service