Technogym Run Forma - Changing the Fuse

25
B
A
Run Forma and Spazio Forma
15.2 Changing the fuse
!
Warnings
The fuse must be changed by the Technogym Technical Support Service.
Before changing the fuse, switch the equipment o by switching the
switch to 0 and unplug the power cable plug from the wall socket.
An extra fuse (B) can be found in the fuse holder, in the slot provided.
Remove the fuse holder to the right of the switch, by pushing the lever.
Replace the blown fuse (A), with the new one, as supplied.
Fit the fuse holder back into its housing, making sure it clicks in properly.
!
Warnings
If the fuse blows repeatedly, lubricate the treadmill. If the problem
persists, consult the Technogym Technical Support Service.
IIf you have already used the spare fuse provided, use a fuse with
certied identical electrical specications for the replacement.