18
SKILLRUN
A
B
E
SAFETY DEVICES AND WARNINGS
STOP button (A). This button can be used to stop the exercise without having to use the normal controls.
Emergency switch (B). This switch stops the exercise immediately. It is equipped with a cord with a peg to clip on to the user’s clothing as shown in the
illustration. Check that the peg grips onto clothing suciently well to operate the emergency switch. The user triggers the emergency switch if he/she
moves too far away from the control panel, that is if the cord becomes taught.
To restore all the functions of the equipment after an emergency stop, reset the switch as shown in the illustration.
After nishing the exercise, replace the emergency switch peg back into its slot (E), as shown in the illustration.
If the emergency switch is activated while the product is in use at any gradient, the treadmill belt runs freely, and no form of braking is applied. Under
such conditions, the user's weight and gravity may cause an unintended acceleration. Hold onto the side supports.
To Next Page
Loading...
