Technogym SKILLRUN UNITY 7000 - Electrical Connection

24
SKILLRUN
A
B
ELECTRICAL CONNECTION
Before connecting the product to the mains power supply, ensure that the
electrical system specications comply with current regulations. Check the
mains power supply specications on the identication label.
Open the panel (A) to reach the label and connector: put a nger in the hole
and pull.
Plug the power cable into the product socket rst and then into the wall socket.
Fix the cable in place with the clamp (B).
Close the panel (A) again, threading the cable through the slot provided.
W
Check the state of the power cable periodically.
The wall socket must be located in a place where the unit may be
easily and safely plugged in and unplugged.
When plugging in, the power supply switch must be in the OFF (0)
position (the equipment must be switched o).