Technogym SKILLRUN UNITY 7000 - Troubleshooting Common Issues

30
SKILLRUN
TROUBLESHOOTING
Below is a list of problems that may arise during normal use of the equipment. If the described solutions do not solve the problem, contact the Technogym
Technical Support Service.
Problem Cause Solution
Equipment does not
switch on
Mains power failure.
Check the power supply at the wall socket used by the
equipment by plugging in an appliance that denitely works.
Power supply cable damaged. Contact the Technogym Technical Support Service.
The power supply cable is not correctly inserted. Check the connection.
The circuit breaker is open.
Check that the two keys next to the switch are closed, by
pressing them fully down.
Too noisy
Equipment not properly levelled. Check the position and level with the rear adjustment foot.
Damaged bearings. Contact the Technogym Technical Support Service.
Worn belt. Contact the Technogym Technical Support Service.
Rotating belt not centrally aligned. Contact the Technogym Technical Support Service.
Problems in monitoring
heart rate with the chest
band
Worn heart rate monitor chest band. Change the chest band.
Chest band transmitter not making proper skin contact. Dampen the inside of the chest band with water.
Damaged transmitter. Change the chest band.