29
SKILLRUN
ROUTINE MAINTENANCE
W
Routine maintenance, adjustment and lubrication jobs must be performed by the Technogym Technical Support Service.
Before starting any job, turn the equipment o by switching the switch to the OFF (0) position and unplugging the power cable from the wall
socket
Every two weeks, check:
- that the individual elements of the treadmill belt and the belt itself are not damaged;
- that the plastic protective devices are undamaged.
Emergency switch
Check the condition of the emergency switch each month.
- ensure that the cord and the spring are present and in good condition.
- check that the emergency switch is undamaged.
- with the treadmill belt in motion at 5 km/h, pull the cord with the spring to trigger the emergency switch and ensure that the belt stops.
- with the treadmill belt in motion at 5 km/h, press the emergency push button to ensure that the belt stops.
If the emergency switch does not work properly, place the product out of service and contact the Technogym Technical Support Service.
To replace defective or damaged components, contact the Technogym Technical Support Service.
To Next Page
Loading...
