Technomark M4 inline - IDI Track and Mechanical Surveillance


Page34sur47

TRAÇABILITÉCRÉATIVE
CREATIVETRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com

Illustration18:Maintenancewindow

 IDITrack:enableordisabletheIDItrackfunctionofmechanicalsurveillance.
Thisfunctioncontrolssomemechanicalbreakdown:
 Brokenstylus
 Markingwithoutpart
 StylusLubrication

Inthecaseofmarkingwithoutpartorbrokenstylus,anerrormessageappearswithoutputactivationifneedbe.
Inthecaseofalackoflubrication,amaintenanceproblemiscreatedandthelubricationLEDbecomesred.
 Lubrication: the LED turns ref if your machine requires lubrication. (Every 500000 impacts or IDI track
problemifthefunctionisactivated).Oncethestylusislubricated,pressthekey1ofthekeyboardtoremove
thealarm.
 XYrevision:theLEDturnsredifyourmachinerequiresanXandYaxisrevision.(10000meterstraveled)
 General revision: the LED turns red if your machine requires a general revision. (the machine has been
markingfor1000hours)
 Maintenance required: the LED turns red ifyour machine requires a return to workshop.(after 1 year of
working)
 Zaxisrevision:theLEDturnsredifthemachinerequiresaZaxis.(10000metertraveled)
Usethebutton toconfirmyourmodificationsor tocancelthem.


Ifitisactivated,itishoweverautomaticallydisableinthecaseofamarkingwithlowforces(1or2).