Technomark M4 inline - Mechanical Settings


Page41sur47

TRAÇABILITÉCRÉATIVE
CREATIVETRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
Enteronecharacterforeachfield.
Usethebutton toconfirmyourmodificationsor tocancelthem.

8.3. Mechanics

Themarkingwindowcanbeconfiguredaccordingtothemechanic(initialsettingsetupinfactory):

Illustration27:mechanicalsettingswindow

 Window:correspond to thereal mechanicalwindow, depending on your mechanicaltype: 50x55,120x55,
and200x55.
 Bidirectional:thebidirectional modeallows reducingmarkingtimesbyusingtheabilitytothemachineto
markinonedirectionortheother
o Off:themachinemarkseachlinefromthebeginningtotheendoftheline.
o On:themachineoptimizetherouteandcaninvertthemarkingdirection
 Optimizedspeed:allowsselectingthespeedtowhichthemachinewillgotothefirstmarkingpoint.Itcan
have the value «off», standard or high. If the value is set to«off»,themachinewillmovetothefirst
markingpointwiththeprogrammedspeedofthefile.
 3rd axis: youcan choosein theaccessory list which oneis connected with the thirdaxis of your marking
machine.
 accesstotheselectedaccessorysettings

Usethebutton toconfirmyourmodificationsor tocancelthem.


