Technomark M4 inline - Special Character Addition; Positioning and Testing Operations


Page29sur47

TRAÇABILITÉCRÉATIVE
CREATIVETRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
 Mark&close:ifthisfunctionisactive,thecurrentmarkingfileisclosedattheendofthemarkingpreventing
fromanunexpecteddoublemarkingforthesamefile.

5.6. Addaspecialcharacter

Notavailableatthistime.
5.7. Positioningandtest

Severaltestsandpositioningcanbemadewiththefollowingmenu:

Illustration13:Testmenu

 Moveallowsmovingthemarkingheadtothepositionofthefirstmarkingpoint.Duringthissettingphase
thefollowingwindowappears.


Positioncanbemodifiedwiththemovingarrowkeys.
Usethebutton toconfirmyourmodificationsor tocancelthem.
 Lineenvelopeallowstestingthecurrentlineenvelope.Themarkingheadmovearoundtheline,delimiting
itsoutline.Duringthistestphase,thefollowingwindowappearsandtheStop/Startbuttonscan
stop/continuethisaction.
 