Technomark M4 inline - 16-Way Input;Output Settings


Page42sur47

TRAÇABILITÉCRÉATIVE
CREATIVETRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
8.4. 16waysettings

Default16waysettingsisthefollowing:

Illustration28:16waywindow

 Number:thenumberoftheinput‐output
 ES:typeinputoroutput
 Function:functionassociatedtotheinput‐output.Functionsareavailablearenotthesamefortheinputor
outputtype.
o Inputfunctions:
 None:nofunctionassociated.
 Start:startthemarking–workswithimpulsivemode.
 Stop:stopthemarking–workswithimpulsivemode.
 Pause:pausethemarking–workswithimpulsivemode.
 Partpresence:allowmarkingstartifadetectionsystemisconnectedontheinputpart
presence.Otherwisethemarkingstartisforbidden.
 Wait:waitinginputtoincludeamarkingfile(5.4.3addawaitinginput).
 Resetserial:resettheserialnumbersofthefile–workswithimpulsivemode(5.3.1Adda
serialnumber).
 Serialincrement:increasethefileserialnumbers–workswithimpulsivemode(5.3.1Adda
serialnumber).