Technomark M4 inline - Input;Output Function Details


Page43sur47

TRAÇABILITÉCRÉATIVE
CREATIVETRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
 FileOpen:openingafileusinginputbinarycombinationofinputshavingthisfunction.Files
thatmaybeopenwiththisfunctionhavetobecalledIO‐xxxwherexxxcorrespondstothe
binarycombinationofrelatedinputs.
Thevalueofeachinputwiththisfunctionisdefinedbytheorderinwhichitappears.The
firstvalueissetto1,thesecondissetto2,thethirdissetto4,thefourthissetto8…
ToopenthefileIO‐003,youneedtoactivatethefirstandthesecondinputwiththe
function.
Iftheinputs5,8and10aresetwiththisfunction,youhavetoactivatedinput5and8and
disabletheinput10toopenthefileIO‐003.
Ifthecombinationdoesn’tcorrespondtoanyfileofthecontroller,thecurrentfilewillbe
used.
 ZInlinehome:ZInlinereturntothehomeposition–workswithimpulsivemode.
 ZInlinemark:ZInlinereturntothemarkposition–workswithimpulsivemode.
 Clearfile:createanewmarkingfile–workswithimpulsivemode
 Test:startamarkingtest–workswithimpulsivemode.
 Backtoorigin:returntotheorigin–workswithimpulsivemode.

o Outputfunctions:
 None:nofunctionassociated.
 Ready:themachineisreadytostartamarking.
 Marking:amarkingisinprogress
 Fault:Faultonthemachine
 Pause:themachineispaused
 Markingend:themarkingisover,themachinegotoitsoriginoritsparkingpoint(8.8
Origin)
 Origin:Themachineisinitsoriginposition.
 Maintenance:revision–amachinerevisionisneeded(seeM4inlinemaintenanceguide).
 Maintenance:lubrication–styluslubricationisneeded(seeM4inlinemaintenanceguide).
 Licensefault:alicenseismissingforthewantedmarking(8.7Licenses).
 Lineoutput:activationofanoutputforamarkingfile(5.4.4Addanoutputchange).
 IDIheight:themeasuredheightisoutofbounds(5.5Generalmarkingsettings)
 Wear:styluswear,ithastobechanged
 Emptyvariable:emptyandforcedvariable(5.3.2Addavariable)
 Emptyfile:thefileisempty
 Inputcopy:copytheinputstateontheoutput.Theinputnumberhastobegiveninthefield
data.

Usethebutton toconfirmyourmodificationor tocancelthem.
