Technomark M4 inline - 16 Channels State Display; Dashboard Indicators


Page7sur47

TRAÇABILITÉCRÉATIVE
CREATIVETRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
 Fileedition
 Maintenance
 Settings

3.2. 16channelsstate
Thestateofeachofthe16channelsisdisplayedinrealtime:
Foreachofthe16channels,thefollowinginformationisavailable:
 AletterIorO:IindicatesthatthechannelisdefinedasaninputandOasanoutput.
 Anumberfrom1to16indicatingchannelnumber
 ALEDindicatingchannelstate:redforinactive,greenforactive
For16channelssettings,seechapter7.416channelssettings.
3.3. Dashboard
Thedashboardpresentsthefollowinginformation:

Maintenance indicator. LED becomes red as a maintenance operation is required. (see Maintenance)

Temperature indicator: displays mean control box temperature and the icon becomes red as
temperature is critical.

Duty cycle: displays current duty cycle and the icon becomes red as software is applying a speed
parameters correction in case of overload.

Current marking file points indicator

Thedutycycleistheoperatingrateinfluencedbythestrengthparameter,themarkingspeedandtheimpact
numberofthemarkingfile.