4.2.1.2.2 Schedule
Go to “Main Menu”→“Record”→“Schedule” to enter into the Schedule interface shown as
Picture4-11 and set the record schedule of NVR.
4.2.1.2.3 Mainstream/Substream
Go to“Main Menu”→“Record”→“Mainstream/Substream” to enter into the menu interface
as shown in Picture 4-12.
Select the channel and the date to be set. One
week’s schedule can be set.
The record schedule of the current channel can
be copied to any other channel or all channels.
Note：
1. In the Record menu and Record Search menu, No
Color stands for no record;
2. “Green” stands for normal record and “yellow”
stands for motion record
3. “Red” stands for alarm record,
Picture 4-12
Mainstream and substream are the two
video bitsream of IPC. Mainstream is
mostly used for recording and the
substream is mostly used for remote
network monitoring.
Channel：
：：
：Select a channel
Resolution ：
：：
： Set IPC resolution as
required
FPS：
：：
：Min 1 and max 30
Bitrate Mode ： Preview Mode and
User-defined Mode
Bitrate：
：：
：Set IPC bitrate
To Next Page
Loading...
