TECHVIEW QV-3012 - Chapter 1 NVR Overview

Chapter
1.1Front Panel
P.S：
NVR is short for Network Video Recorder.
NVR Front Panel（
（（
（
For reference only
Item
Key title
or Indicator
1
Power Indicator
2 IR Receiver
3 HDD Indicator
4
Channel
select:
CH1 CH2
CH3 CH4
5 QUAD
6 REC
7 MENU/ESC
8 Down Key
9 SEL/EDIT
10 Up Key
11 PTZ
12 REW
13 PAUSE
14 PLAY
15 FWD
16 STOP
17 USB
1
Chapter
1
Overview of NVR
NVR is short for Network Video Recorder.
For reference only
）
））
）
Remark
Function & Description
PWR
If the “Green” indicator is on, NVR
is getting power
Receive IR signal from Remote Controller.
HDD
If the “Red” indicator flashes,
the hard drive is being read or written to.
indicator is always on, it means the hard disk is abnormal, unformatted or
has no recording files.
Select a channel
On Live or Playback mode, switch to Quad display.
●
Press the button to start manual record.

Enter into Main menu, exit or stop playing

Move down

Enter into shortcut menu and select ENTER and EDIT

Move up
PTZ
Enter into PTZ control interface

Move to left; Rewind function;
decrease PTZ rotation speed and parameter value of graphic setting

Pause / play frame by frame manually

Enter into Record Search menu and play.

Right key; increase PTZ rotation speed and Parameter value.

Stop playing or stop manual record
USB port
Table 1-1
用户手册
用户手册用户手册
用户手册
Overview of NVR
Function & Description
is getting power
normally.
the hard drive is being read or written to.
If the
indicator is always on, it means the hard disk is abnormal, unformatted or
On Live or Playback mode, switch to Quad display.
Enter into shortcut menu and select ENTER and EDIT
decrease PTZ rotation speed and parameter value of graphic setting
Right key; increase PTZ rotation speed and Parameter value.