Picture 4-23
Picture 4-25
4.2.2.3 Play Backup Files
1. Copy backup files to the computer.
2.Open playback player and click “+” or“ ”. For example, if you want to
choose *.264, add backup file and select a file to play, as shown in Picture 4-26.
If you want to back up with USB, select USB and click OK to start processing and
you may see the backup progress shown as Picture 4-23.
If you want to back up with DVD, select DVD and click OK to start processing and
you may see the backup progress shown as Picture 4-24.
After backup finishes, message Backup
Finishes will appear at down-right coner, as
shown in Picture 4-25.
If the file is backed up with format
of .264， it can be played back by NVRClient
player in the CD attached with NVR(the
player will be automatically installed during
installing NVRClient. CD backup file is in
format of *.nvr).
Note: Before backup, connect devices for
backup (U flash disk or other devices with
USB interface)
To Next Page
Loading...
