Set the schedule name and schedule time and then click “Add” to save the schedule. You can
set day schedule or week schedule. : add button; : delete button.
Set Day Schedule
Click and then drag the cursor on the time scale to set record time; click and then
drag the cursor on the time scale to delete the selected area.
You can manually set the record start time and end time. Click or and then click
“Manual” on each day to pop up a window as shown below. Set the start and end time in the
window and then click “OK” to save the settings.
Click “All” to set all day recording; click “Reverse” to swap the selected and unselected time
To Next Page
Loading...