TechVision PS32E8N2 - Exception Alarm; IPC Offline Settings; Video Loss Settings; Exception Handling Settings

Alarm Management
DVR User Manual
76
intrusion detection configuration interface.
9.4 Exception Alarm
9.4.1 IPC Offline Settings
① Click StartSettingsAlarmExceptionIPC Offline Settings to go to the interface as
shown below.
② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”,
“Pop-up Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor
alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save the settings.
9.4.2 Video Loss Settings
① Click StartSettingsAlarmExceptionVideo Loss Settings to go to the interface as
shown below.
② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”,
“Pop-up Message Box” and “E-mail”. The Video Loss Settings are similar to that of the sensor
alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save the settings.
9.4.3 Exception Handling Settings
① Click StartSettingsAlarmExceptionException Handling Settings to go to the