TechVision PS32E8N2 - Alarm Event Notification; Alarm-Out; E-Mail

Alarm Management
DVR User Manual
77
interface as shown below.
② Enable or disable “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The
exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm for
details).
③ Click “Apply” to save the settings.
9.5 Alarm Event Notification
9.5.1 Alarm-out
① Click StartSettingsAlarmEvent Notification to go to the following interface.
② Set the delay time and the schedule of each alarm-out. You can click “Edit Schedules” to
edit the schedules (see 7.3.1 Add Schedule for details).
③ Click “Apply” to save the settings. You can click “Test” to test the alarm output.
9.5.2 E-mail
Click StartSettingsAlarmEvent NotificationE-mail to go to the e-mail configuration