TECNA WELD TESTER TE1700
In modes
Welding current: the RMS value of the I
RMS
welding current and the
I
peak
peak value reached during welding are displayed.
In mode
Welding current: the RMS value of the I
RMS
welding current, the I
peak+
max positive peak value and the I
peak-
max negative peak value reached
during welding are displayed.
In mode
Secondary voltage: displays the RMS voltage value V
rms
present on the
secondary circuit and its V
peak
maximum peak value. To perform this
measurement, use the cables for measuring electrodes voltage.
PAGE 16
To Next Page
Loading...
