TECNA TE550 - Page 37

S.p.A. ITEM TE550 Instruction manual
37/92
SPOTS 2
This parameter indicates the number of spots of which the associated segment is composed.
INCREMENT 2
This parameter indicates the current stepper percentage to be attained upon the completing
of the spots set in the associated segment.
SPOTS 3
This parameter indicates the number of spots of which the associated segment is composed.
INCREMENT 3
This parameter indicates the current stepper percentage to be attained upon the completing
of the spots set in the associated segment.
SPOTS 4
This parameter indicates the number of spots of which the associated segment is composed.
INCREMENT 4
This parameter indicates the current stepper percentage to be attained upon the completing
of the spots set in the associated segment.
SPOTS 5
This parameter indicates the number of spots of which the associated segment is composed.
INCREMENT 5
This parameter indicates the current stepper percentage to be attained upon the completing
of the spots set in the associated segment.
SPOTS 6
This parameter indicates the number of spots of which the associated segment is composed.
INCREMENT 6
This parameter indicates the current stepper percentage to be attained upon the completing
of the spots set in the associated segment.
SPOTS 7
This parameter indicates the number of spots of which the associated segment is composed.
INCREMENT 7
This parameter indicates the current stepper percentage to be attained upon the completing
of the spots set in the associated segment.