5
codice 09MAXX001
versione EN
revisione 01
Use and Maintenance Manual
MaxX
1.5
Definition of symbols
All parts concerning safety are highlighted in bold.
All warning notes that alert the personnel concerned that
the described operation involves exposure to residual risk,
with possible damage to health or injury, if not carried out
in compliance with the instructions, are shown in bold and
identified with the following symbol :
All warning notes that indicate that the described
operation must be performed by trained and qualified
personnel are shown in bold and indicated with the
following symbol:
In turn, the trained / specialized personnel, depending on
the specific tasks, can be indicated by the following
symbols: (see details in paragraph 1.7)
1.6
Personnel assigned to
operations
As indicated in this manual, certain procedures must be
carried out only by qualified or trained personnel.
The level of qualification is described using standard terms:
1. qualified personnel have technical knowledge and/or
sufficient experience to enable them to avoid thepotential
dangers from electricity and/or mechanical movements
(operation and maintenance personnel) trained personnel
are appropriately advised and/or supervised by qualified
persons to enable them to avoid the potential dangers from
electricity and/or mechanical movements (operation and
maintenance personnel)
2. the User is obliged to obtain confirmation of
the following from all designated persons, before they are
allowed to work to work with MaxX the personnel have
received the instruction
2.1. the personnel have received the instruction manual, and
have read and understood it
2.2. the personnel shall work in the manner described..
1.7
Trained personnel
The qualifications are given below of the personnel
allowed to use the MaxX:
OPERATOR: a person or persons who,
following appropriate and indispensable training, is/are
assignedand authorized by the owner of the MaxX to run
operations. The occupier of this post must be completely
aware of and understand the contents of this manual
HANDLER: this post requires specific skill
(possibly acquired by attending mandatory courses, if
required by law, in hoists the methods and features of
harnesses handling and safe handling procedures. This
position also requires complete awareness and
understanding of the contents of this manual, in particular
paragraph 2.2
MECHANICAL MAINTENANCE OPERATOR:
this post requires specific skills in the installation, adjustment,
maintenance, cleaning and/or repair of systems. The occupier of
this post must be completely aware of and understand the
contents of this manual.
SPECIALIZED TECHNICIAN:
this post
requires specific skills in carrying out installation, adjustments,
maintenance cleaning and/or repair. For his preparation and
experience he has skills and knowledge in the lifting sector as
well as a sufficient familiarity with the main regulations in order
to be able to determine any deviations from the expected
conditions.
The occupier of this post must be completely aware of and
understand the contents of this manual.
To Next Page
Loading...