Tecnoware ERA PLUS 900 - Page 12

User’s manual 10 UPS ERA PLUS 900-1.100
Technology Line Interactive with Stabilizer
Nominal Input Voltage Single-phase 230 Vac
Input Voltage Range +20% / -25%
Input/Output Frequency 50/60 Hz (automatic selection)
Input Frequency Range +/- 5%
Nominal Output Voltage Single-phase 230 Vac
Output Voltage Regulation
(Normal mode)
Through AVR (Automatic Voltage Regulation)
Output Voltage Regulation
(Battery mode)
+/- 5%
Output Inverter Waveform Modified Sinewave
Accepted Overload < 130%
Certifications
CE
Standards: CEI EN 62040-1: 2009 (Low Voltage Directive) –
CEI EN 62040-2: 2006 (EMC Directive)
Battery Type Lead acid, sealed, free maintenance
Number of batteries 1
Nominal Battery Voltage 12 Vdc
Battery Specifications 12 Vdc – 4,5 Ah – 6 cells 12 Vdc – 7,2 Ah – 6 cells
Backup Time (typical) 10 min
Battery Charge Time (typical) 4 hours
Audible Noise (at 1 meter) < 40 dBA
Cooling Natural
Environmental Operative Specification
Temperature: 0-40 °C - Humidity 0-95% (without condensation)
Altitude: max 3.000 mt
Computer Interface - 1 USB port
UPS Management Software -
Software TecnoManager,
downloadable free of charge from
www.tecnoware.com
Output sockets 2 UPS Output sockets (Schuko/Italian type)
Dimension (W x H x D) 10,1 x 14,2 x 27,9 cm
Net Weight 3.7 Kg 4,5 Kg
Technical data may change without prior notice