TECO JNTHBCBA0001BEAU - Page 29

27
(8):15-9 Display of Pressure Setting 0000: Setting and Feedback
0001: Only Setting
0002: Only Feedback
1.) 15-9=0000: Display setting and feedback pressure value on keypad.
The 1
st
and 2
nd
segment is setting pressure value, and 3
rd
and 4
th
segment is feedback pressure value.
2.) 15-9=0001: Only display setting pressure value.
3.) 15-9=0002: Only display feedback pressure value.
(9):16-0 Frequency Upper limit 0.01 – 400.00 Hz
16-1 Frequency Lower limit 0.00 – 400.00 Hz
Operation example:
Confine output frequency in the certain range.
Set a frequency lower limit could increase response time and reduce vibration of pump.
Set a frequency upper limit could avoid motor operate above rate speed.
PID Output
Output Frequency
400.00Hz
16-0 Frequency Upper Limit
16-1 Frequency lower Limit (Hz)
0.01 Hz