TECO JSDAP-100A3 - Timing Diagram of Auto-Selection Mode

5-82
5-7-5 Timing Diagram of Auto-selection Mode
Position Trigger
(PTRG)
In Position (INP)
Tool turret display
(DO 1)
Tool turret display
(DO 2)
Tool turret display
(DO 3)
Pn313
Pn313
Servo on
Tool Turret
selection (Pos 1)
Tool Turret
selection(Pos 2)
Tool Turret
selection(Pos 3)
Tool Turret
selection(Pos 4)
Control Mode
switching (MDC 1)
Control Mode
switching (MDC 2)
Motor Speed
(rpm)
Tool turret display
(DO 4)
Tool Turret No.4 selected Tool Turret No.11 selected
Tool Turret No.1 displayed
Tool Turret No.4 displayed
Tool Turret No.11 displayed