Tecsun S-2000 - Page 13

flashing
flashing
11
3) AUTO SCAN (QUICK) STORAGE
- Press and release the VM/VF button with a "B" sound and notice the time shows in the upper
right corner of display.
- Press / buttons for about 2 seconds, a "B" will sound,
and the radio scans from one station to another, staying on
each station for about 5 seconds. Quick press the MEMORY
button with a long "B --" sound to store your desired station
before the frequency running to the next available station.
To stop the scan, press any buttons except the MEMORY
button.
Note: This function is not available for Air Band and SW SSB.
Frequency changing
flashing
4) STORE A STAION INTO ANOTHER PAGE
To store a frequency into a memory in another page, first choose the page, then the memory
location and then store the frequency.
- Turn on the radio and tune to your desired station.
- Shortly press the MEMORY button with a "B" sound, note
that PRESET will flash in the right corner of the LCD.
- Shortly press the PAGE button with another "B" sound and
PAGE will flash in the right corner of the LCD.
- While the PAGE is flashing, use the / buttons or turn
the TUNING knob or key in the number of a page to select
the page that you want to store into.
- Press the [MEMORY] button to confirm it with a long "B --" sound (or it will automatically confirm
after 3 seconds with a long "B --" sound.)
PAGE changing