27
EN
Common Malfunction Malfunction Check
Cooker turns off after
warning with continuous
beeps.
• Checkifthepotisinductioncompatible
• Makesurethatthereceptacleisplacedin
thecentreoftheceramicglassplate.
• Check if thepot base diameter ismore
than12cm.
The cooker stops heating
during use
• Checkiftheroomtemperatureistoohigh;
• Checkifairentry/airexitisblocked;
• For boil and milkmodes, the hob stops
automaticallywhenitreachesmaximum
temperature.
• Checkiftheappliancehasbeenstopped
byasafetydevice.Inthiscase,waitfor
severalminutestoconfirm.
Please Note: Ifthepowercordisdamageddonotusetheappliance.Haveit
replacedbyaTefalApprovedServiceCentretoavoidanydanger.
ERROR CODES
•Receptacle missing or not the correct type:
ifthepotbasediameterislessthan12cmorifthepotmaterialisunsuitable,
thebuzzerwillsoundandthedigitaldisplayshowsE1.Changerdecookware.
•Protection of the power source against overheating:
Ifthepowersourceoverheats,theinductioncookingappliancecutsoffthe
incomingpowersupplyandthescreendisplaysE2.Laisserlaplaquerefroidir:si
ledéfautpersistemercidecontacterleSAV.
•Over or under- voltage protection:
Ifthevoltageisgreaterthan265V-285V,theincomingpowersupplyfor
theinductioncookingapplianceiscutoffandthedigitalscreendisplays“E3”;
ifthevoltageisbetween150Vand170V,theincomingpowersupplyforthe
inductioncooking appliance iscut off and thedigital screen displays“E4”.
Vérifierquevotreappareilestencorrespondanceavecvotreréseauélectrique.
•Temperature sensor:
Ifthesensorisinanopencircuit,theinductioncookingappliancewillcontinue
tooperateforoneminuteandthedigitalscreenwilldisplay“E5”;ifthesensor
detectsashortcircuit,theinductioncookingappliancewillimmediatelydisplay
E6.ContacterleSAV.
•NTC abnormal protection:
whenNTCvaluechangeissmallforIHworking5min,theinductioncookerwill
shutofftheinputpowerandthedisplayshowsE7.