23
EN
7 TURNIN OFF AND CARRYIN THE DEVICE
In case you encounter the problems stated below, please check whether you can
solve the problem by yourself or not before contactng the Authorzed People. In
case the problem exceeds your boundares of authorty, please call the Authorzed
people.
MALFUNCTION
POSSIBLE
REASON
SOLUTION
Devce s not workng
and none of the dsplays
ate on.
Plug s not ftted
approprately to the
socket.
Check whether the plug n
plugged to the socket or not and
whether there s electrcty or
not.
ere s no electrcty on
the socket or there has
been a blown-out.
ere s damage on the
operatng cable or on
the socket.
Immedately turn
o the fuse and plug out the
devce. Contact wth the
Authorzed Person for the
replacement of the cable of the
devce. Appeal for help of
qualfed electrcal expert for the
socket control.
Compressor s always
workng.
e lds of the devce s
frequently openng and
closng or the ld of the
devce s le open.
Do not open and close the ld of
the devce unless necessary, and
keep the ld of the devce closed.
Devce s not freezng/
coolng
e ld s le open.
Check the ld of the devce.
Abolsh all the aspects that
prevent the closure.
Too many products are
placed.
Pay attenton to loadng lne.
Place the products as not to
exceed ths lne lmt (Image
II ).
Ventlatng slts are
closed
Remove the objects around
the devce. Keep the necessary
dstance.
ere s a heat source
close to the devce.
Keep the heat sources away from
the devce.
ermostat s
malfunctoned
In case the thermostat ndcator
s ashng, contact wth the
Authorzed Person.