Tefcold SFI Series - Producers Area of Responsibility

6
EN
Please examine the general view of
the device on Image AA .
1. Sldng glass ld
2. Separator
3. Handle
4. Thermostat probe
5. Protectve plastc aganst
mpacts
6. External body
7. Control board
8. Stays
The parts and documents are included
in the package with the device.
• User gude
1.3 PRODUCER’S AREA OF
RESPONSIBILITY
The manufacturer may not be held
responsible in any way for injuries
and damages that may arise in case
of failing to comply with the
aspects stated below. The procedures
performed in breach of the rules
make your equipment out of warranty.
•The assembly and demonstration of
the equipment must be carried out by
the Authorized Service.
•The equipment has freezer, meat
and cooler modes. Do not use the
equipment for purposes other than
its intended use.
•Use the equipment as specified in
this manual (Chapter 2.3).
•Comply with the warning and safety
instructions specified in the manual
(Chapter 1.1).
•Observe the applicable safety
instructions in your region.
•Use only the original spare parts
provided by the manufacturer in order
to maintain the safety conditions.
NOTE
Maintenance, repair and chane
of spare parts operations shall be
carried out by Authorized People.