Teka CML 45 - Troubleshooting Coffee Quality; Coffee Not Hot or Creamy Enough; Coffee Delivery Speed Issues

English
115
PROBLEM POSSIBLECAUSE
REMEDY
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
The coffee is not hot.
The coffee is not creamy
enough.
The coffee is delivered too
slowly or a drop at a time.
• The coffee is ground too
coarsely.
• Wrongtypeofcoffee
• The coffee is ground too
finely.
• Warmthecups byrinsing
them with hot water.
• Beforemakingcoffee,heat
the infuser by pressing the
button (B8) (fig. 12).).
• Turn the grinding adjust-
ment knob one click an-
ticlockwise towards “1”
while the coffee mill is in
operation (fig. 11).
• Use a type of coffee for
espresso coffee makers.
• Turn the grinding adjust-
ment knob one click an-
ticlockwise towards “7”
while the coffee mill is in
operation (fig. 11).
Continue one click at a
time until coffee delivery
is satisfactory.
The effect is only visible
after delivering two cof-
fees.
• The cups were not pre
heated.
• The infuser has cooled
downbecause2/3minutes
have elapsed since the last
coffee was made.