3.2.7 Temperature measurement
To avoid electrical shock and/or damage to the
instrument, do not apply more than 250Vdc or
220Vac rms between the °C terminal and the
COM terminal.
To avoid electrical shock, do not use this
instrument when voltages at the measurement
surface exceed 60v dc or 24v rms. Ac.
To avoid damage or burns. Do not make
temperature measurement in microwave ovens.
To measure temperature:
1. Set the rotary switch to ℃ range and the LCD will show
the current environment temperature.
2. Insert ‘K’ type thermocouples into the COM terminal
and ℃ terminal (or you can insert it by using Multi Function
Socket)，Takings care to observe the correct polarity.
3. Touch the object with the thermocouple probe for
measurement.
4. Read the stable reading from LCD.
To Next Page
Loading...
