power switching circuits, remember that high amplitude
voltage pulses at the test points can damage the
multimeter. Use of a TV filter will attenuate any such
pulses.
* Use just one 6F22 battery, properly installed in the Meter's
battery case, to power the Meter.
* Replace the battery as soon as the battery indicator
( ) appears. With a low battery, the Meter might
produce false readings that can lead to electric shock and
personal injury.
* Do not measure voltages above 1000V in Category III, or
600V in Category Ⅳ installations.
* When in REL mode, the “REL” symbol is displayed.
Caution must be used because hazardous voltage may be
present.
* Do not operate the Meter with the case (or part of the case)
removed.
1.2 Symbols:
Symbols used in this manual and on the instrument:
Caution: refer to the instruction manual.
Incorrect use may result in damage to the device
or its components.
To Next Page
Loading...
