Tektronix 11801C - Table B 6: 11801 C AC Line Power Specifications; Table B 7: 11801 C Environmental Specifications

Appendix B: Specifications
Appendices
BĆ6
TableĂBĆ6:ă11801C AC Line Power Specifications
Characteristic Specification
Voltage ranges 90 to 132 V
RMS
or 180 to 250 V
RMS
Voltage ranges apply to trace distortion,
which reduces peak line voltage 5%
Installation Category II
Frequency 48 Hz to 440 Hz
Power 320 W
Current 4.6 A
RMS
at 50 Hz, 90 V line with 5%
clipping
Fuse 6 A, 250 V normal blow
TableĂBĆ7:ă11801C Environmental Specifications
Characteristic Specification
Temperature Meets MIL-T-28800E, Type III, Class 5
Operating 0_ C to 50_ C
NonĆoperating -40_ C to 75_ C
Humidity Up to 95% relative humidity, at up to 50_ C
Altitude Meets MIL-T-28800E, Type III, Class 5
Operating Up to 4.5 km (15,000 ft)
NonĆoperating Up to 15 km (50,000 ft)
Vibration Operating, sampling heads not installed:
meets MIL-T-28800E, Type III, Class 5 (secĆ
tion 4.5.5.3.1)
Shock NonĆoperating, sampling heads not installed:
meets MIL-T-28800E, Type III, Class 5
(section 4.5.5.4.1)
Bench handling Operating: meets MIL-T-28800E, Type III,
Class 5 (section 4.5.5.4.3)
Packaged product vibration
and bounce
Packaged product, sampling heads not
installed: meets NSTA Proj. 1A
Drop of packaged product Packaged product, sampling heads not
installed: meets NSTA Proj. 1A
Electrostatic immunity No disruption or degradation of performance:
up to 10 kV. No damage to instrument: up to
20 kV