Commands Listed in Alphabetical Order
Examples
CH4:UNITS AUTO
sets the vertical axis units for Channel 4 so that they are
determined automatically by the instrument.
CH1:UNITS? mi
ght return
CH1:UNITS VOLT, indicating that the vertical-axis
units for Channel 1 are set to volts.
CH<x>:WFMLabel
This command sets or queries the label associated with the channel waveform
specified.
Group
Vertical
Syntax
CH<x>:WFMLabel <Qstring>
CH<x>:WFMLabel?
Related Commands
MATH<x>:WFMLabel, REF<x>:WFMLabel
Arguments
Qstring sets the label for the waveform.
Examples
CH1:WFMLABEL "MY CH1 WAVEFORM" se ts the label for CH1 to be "My CH1
waveform," which is the label displayed with the waveform when it is displayed
on screen.
CH1:WFMLABEL? might return CH1: WFMLABEL "MY CH1 WAVEFORM",
indicating that the label for channel 1 is set to "My CH1 w
aveform".
CH<x>:WLENgth:LIST? (Query Only)
This query only command returns a list of the available wavelengths for the
channel specified by x, which can be 1 through 8. (Generally, only optical modules
in CH1 or CH2 have wavelength selections.) The returned list contains the
actual wavelengths available for the channel. Use the CH<x>:WLENgth:VALue
command to set a value from the list.
Group
Vertical
Syntax
CH<x>:WLENgth:LIST?
Related Commands
CH<x>:WLENgth:VALue
DSA/CSA/TDS8X00/B Series Programmer Manual 2-89
To Next Page
Loading...
Need help?
General
