Tektronix DSA8200 Series - Page 111

Commands Listed in Alphabetical Order
Examples
COMPENSATE:RE
SULTS:VERBOSE?
might return
COMPENSATE:RESULTS:VERBOSE COMP COMPLETED, NO FAILURES.
COMPensate:SAVe:USER:ALL (No Query Form)
This command (no query form) saves the volatile run-time compensation data for
the mainframe and all resident module channels into their respective nonvolatile
user memories.
Group
Compensation
Syntax
COMPensate:SAVe:USER:ALL
Examples
COMPENSATE:SAVE:USER:ALL.
COMPensate:SAVe:USER:CH<x> (No Query Form)
This command (no query form) saves the volatile run-time compensation data for
the module channel into the nonvolatile user memory of the module channel. The
channel is specified by x, which can be 1 through 8.
Group
Compensation
Syntax
COMPensate:SAVe:USER:CH<x>
Examples
COMPENSATE:SAVE:USER:CH2.
COMPensate:SAVe:USER:MAInframe (No Query Form)
This command (no query form) saves the volatile run-time compensation data for
the mainframe into the nonvolatile user memory of the mainframe.
Group
Compensation
Syntax
COMPensate:SAVe:USER:MAInf rame
Examples
COMPENSATE:SAVE:USER:MAINF RAME.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-97