Commands Listed in Alphabetical Order
Syntax
DATa:TIMebase
{ MAIn | MAG1 | MAG2 }
DATa:TIMebase?
Related Commands
CURVe, DATa:SOUrce
Arguments
MAIn selects MAIn as the timebase for the waveform data to be transferred
out by the next CURVe? command.
MAG1 selects MAG1 as the timebase for the waveform data to be transferred
out by the next CURVe? Command.
MAG2 selects MAG2 as the timebase for the waveform data to be transferred
out by the next CURVe? command.
Examples
DATA:TIMEBASE MAG1 sets the timebase for the waveform data to be transferred
out to MAG1.
DATA:TIMEBASE? might return DATA:TIMEBASE MAIN, indicating that the
timebase for the source waveform data is set to main.
DATE
This command sets or queries the date that the instrument can display.
Group
Miscellaneous
Syntax
DATE <Q String>
DATE?
Arguments
<QString> isadateintheform"yyyy-mm-dd".
yyyy is a four-digit year number.
mm is a two-digit month number from 01 to 12.
dd is a two-digit day number in the month.
NOTE. There must a dash ( - ) after t he yyyy and after the mm.
Examples
DATE "2 006-01-24" sets the date to January 24, 2006.
DATE? might return DATE 2006-06-01, indicating that the date is June 1, 2006.
2-11 4 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
