Commands Listed in Alphabetical Order
Arguments
NR1 is an intege
rintherangeof0through15representingacolorasdefined
in the above table.
Examples
DISPLAY:COL
OR:FOREGROUND 5
sets the color of the foreground (graticule) to
red.
DISPLAY
:COLOR:FOREGROUND?
might return DISPLAY:COLOR:FOREGROUND
7
, indicating that the color o f the foreground (graticule) is white.
DISplay:COLor:HIStogram
This command sets or queries the color of the histogram data and its boundary
area. (This command is the same as the HISTogram:COLOR comma nd.) This is
equivalent to setting Color in the Display Options section of the Histogram Setup
dialog box. The available colors are listed in the following table.
Group
Display Control
Syntax
DISplay:COLor:HIStogram <NR1>
DISplay:COLor:HIStogram?
DSA/CSA/TDS8X00/B Series Programmer Manual 2-121
To Next Page
Loading...
