Commands Listed in Alphabetical Order
MASK:MASK<x>
:COUNt? (Query Only)
This query only command returns the number of hits in the specified mask. The
mask is specified by <x>, which can be 1 through 8. The count will be zero unless
the MASK:COU
Nt:STATE is ON (or was ON).
Group
Mask
Syntax
MASK:MASK<x>:COUNt?
Related Commands
MASK:COUNt:STATE
Returns
NR1 is the number of hits in the specified mask.
Examples
MASK:MASK3:COUNT? might return MASK:MASK3:COUNT 1478, indicating that
the number of hits in Mask 3 is 1478.
MASK:MASK<x>:NR_Pt? (Query Only)
This query only command returns the number of points (vertices) in the specified
mask. The mask is specified by <x>, which can be 1 through 8. One use of
this query is to see how many pairs a MASK:MASK<x>:POINTSPcnt or
MASK:MASK<x>POInts command will return.
Group
Mask
Syntax
MASK:MASK<x>:NR_Pt?
Related Commands
MASK:MASK<x>:POInts, MASK:MASK<x>:POINTSPcnt
Returns
<NR1> is the number of points in the specified mask.
Examples
MASK:MASK3:NR_PT? might return MASK:MASK3:NR_PT 6, indicating that
Mask 3 has 6 points.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-205
To Next Page
Loading...
