Commands Listed in Alphabetical Order
ENET11096 sele
cts the 11.095728 Gb/s bit rate and mask in accordance with
IEEE 802.3ae-2002.
ENET10GB_LRM
selects the 10.3125 Gb/s bit rate and mask, in accordance
with IEEE 802.3aq - 2006.
ENET100B_B
X10
selects the 125 Mb/s bit rate and mask, in accordance with
IEEE 802.3ah - 2004.
ENET100B_L
X10
selects the 125 Mb/s bit rate and mask, in accordance with
IEEE 802.3ah - 2004.
ENET1000B
_KX
selects the 1.25 Gb/s bit rate and mask, in ac cordance with
IEEE 802.3ap Draft 3.3.
ENET4125
0
selects the 41.2500 Gb/s bit rate and mask, in accordance with
Ethernet 40GBASE-FR standard.
FC133 se
lects the 132.81 Mb/s bit rate and mask, in accordance with the
ANSI X3.230-1994 standard.
FC133E
selects the 132.81 Mb/s bit rate and mask, in accordance with the
ANSI X3.230-1994 standard.
FC266
selects the 265.6 Mb/s bit rate and mask, in accordance with the ANSI
X3.230-1994 standard.
FC26
6E
selects the 265.6 Mb/s bit rate and mask, in accordance with the
ANSI X3.230-1994 standard.
FC5
31
selects the 531.2 Mb/s bit rate and mask, in accordance with the ANSI
X3.230-1994 standard.
FC
531E
selects the 531.2 Mb/s bit rate and mask, in accordance with the
ANSI X3.230-1994 standard.
FC
1063
selects the 1.0625 Gb/s bit rate and mask, in accordance with the
ANSI X3.230-1994 standard.
F
C1063E
selects the 1.0625 Gb/s bit rate and mask, in accordance with the
ANSI X3.230-1994 standard.
FC2125 selects the 2.125 Gb/s bit rate and mask, in accordance with the ANSI
Fibre Channel Physical Interface (FC-PI) Rev 11 draft standard.
FC2125E_ABR selects the 2.125 Gb/s bit rate and mask, in accordance with
ANS1 X3.230-1999 NCITS 1235D/Rev 11, Abs, Beta, Recv.
FC2125E_ABT selects the 2.125 Gb/s bit rate and mask, in accordance with
ANS1 X3.230-1999 NCITS 1235D/Rev 11, Abs, Beta, Transm.
FC2125E_AGR selects the 2.125 Gb/s bit rate and mask, in accordance with
ANS1 X3.230-1999 NCITS 1235D/Rev 11, Abs, Gamma, Recv.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-211
To Next Page
Loading...
Need help?
General
