Commands Listed in Alphabetical Order
| OC9| OC12 | OC1
8 | OC24 | OC36 | OC48 | OC192 | OC768
| PCIEX PRESS_Rcv | PCIEXPRESS50_Rcv | RIO_SERIAL1G |
RIO_SERIAL2G | RIO_SER IAL3G | SAS3_0_XR | SAS3_0_XR_AASJ
| SAS3_ 0_SATA
| USERMa sk | XFI9950 _TAA | XFI9950_RAD |
XFI9950_THB | XFI9950_ RHC | XFI9950_TMBP | XFI9950_RMCP
|XAUIFar | XAUIRFar | XAUINear | XAUIRNear }
MASK:STANdard?
Arguments
NONe disables the communications standards.
CUSTom selectsthebitrateandmas
k associated with an imported custom
mask.
ATARXG1 selects the Serial ATA, G
1 Rx, 1.5 Gb/s bit rate and mask.
ATARXG2 selects the Serial ATA, G2 Rx, 3 Gb/s bit rate and mask.
ATARXG3 selects the Serial ATA, G2 Rx, 6 Gb/s bit rate and mask.
ATATXG1 selects the Serial ATA, G1 Tx, 1.5 Gb/s bit rate and mask.
ATATXG2 selects the Serial ATA, G2 Tx, 3 Gb/s bit rate and mask.
ATATXG3 selects the Serial ATA, G2 Tx, 6 Gb/s bit rate and mask.
ENET40GB_LR4 selects the 10
.3125Gb/sbitrateandmask,inaccordance
with the Ethernet 40GBASE-LR4 standard.
ENET40GB_SR4 selects the 1
0.3125 Gb/s bit rate and mask, in accordance
with the Ethernet 40GBASE-SR4 standard.
ENET100GB_ER4 selects th
e 25.78125 Gb/s bit rate and mask, in accordance
with the Ethernet 100GBASE-ER4 standard.
ENET100GB_LR4 selects t
he 25.78125 Gb/s bit rate and mask, in accordance
with the Ethernet 100GBASE-LR4 standard.
ENET100GB_SR10 select
s the 10.3125 Gb/s bit rate and mask, in accordance
with the Ethernet 100GBASE-SR10 standard.
ENET1250 selects the 1
.250 Gb/s bit rate and mask, in accordance with the
IEEE 802.3 standard.
ENET2500 selects the
2.500 Gb/s bit rate (2x Gigabit Ethernet) and mask.
ENET3125 selects the 3.125 Gb/s bit rate and mask, in accordance with the
IEEE 802.3ae-2002 s
tandard.
ENET9953 selects the 9.95328 Gb/s bit rate and mask, in accordance with the
IEEE 802.3ae-2002
standard.
ENET10313 selects the 10.3125 Gb/s bit rate and mask, in accordance with
the IEEE 802.3ae-
2002 standard.
2-210 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
